Carbon Steel Flange Manufacturer in India



Carbon Steel Flange Manufacturer in India

Krishna Steel & Alloys are Carbon Steel Flange Manufacturer in India. One of our popular products is the Flange. Flange is a forged or a cast ring that is designed to connect sections of a pipe or any other machinery that requires a intermediate connecting point. Some of the basic types of flanges that have an enormous demand are the Stainless Steel Flanges, Alloy Steel flanges, Carbon Steel Flanges.

Carbon Steel Flange

Krishna Steel and Alloys is a Prominent Carbon steel flange manufacturer in India. Carbon Steel Flange and end flange connectors are essentially made of carbon steel. Basic principles include ASTM A694, ASTM A105N (SA105N), MSS SP-44, DIN 2533. Accompanying weight ratings are from class 150 to 2500.


Carbon steel is a steel with carbon content up to 2.1% by weight. Where in AISI defines:

  • No combination component (minimum substance) required, as of Cr, Mo, Ni, Ti, Va and so forth.
  • Specified minimum of Cu will not surpass 0.04%.
  • Maximum Mn 1.65%, Si 0.06%.

As carbon component content increases, the steel will get more enthusiastically and more grounded after warmth treatment. Despite what might be expected, it become less flexible. Where if without heat treatment, higher carbon will diminish weldability. Carbon steel may include alloy steels in case it is not used as stainless steel.


Refers to Mild Steel or Low Carbon Steel Pipe Flanges

Carbon steel pipe flanges normally receive gentle steel or low carbon steel, as it includes little level of carbon, solid and extreme however not promptly tempered. Which with lower cost and material could be utilized for some applications.

  • Low carbon steel: C content at 0.005% to 0.3%.
  • Medium carbon steel: 0.3 to 0.8% of Carbon.
  • High carbon steel: 0.8-2.0% of carbon.
  • Ultra-high carbon steel: 1.25% to 2.0% of C.


    Carbon Steel Pipe Flanges

    Krishna Steel & Alloys is ISO affirmed leading Carbon steel flange manufacturer in India. Carbon steel ASTM A105 Blind Flanges are perfect for piping frameworks or vessels that require ordinary inspection used to seal vessel openings or piping segments. In A105 SORF Flange, the combination contain low carbon and silicon containing steel like AISI 1330 Flange yet with lower manganese content by having a marginally bigger distance across than the channel to makes it simpler to association with the funnel by 1 filet weld, at the outside of the flange. Carbon steel flange manufacturer in India is most normal type of steel flange because of moderately minimal effort and possessing material properties that are required in Carbon steel flange manufacturer in India segments and has a similar incline and thickness of the funnel, gives the most elevated level of joint integrity due to welded with a channel.

    Carbon steel flange manufacturer in India is an average normal material (mellow carbon steel) for manufactured carbon steel flange, it utilized in a ton of spots for surrounding and higher-temperature administration in pressure frameworks. This material is solid, cost lower, and hard to break. In the event that utilized in a stainless steel piping framework, it will be adjusted with a lap joint end ring.

    We Carbon steel flange manufacturer in India and Carbon Steel Flange using best quality material and experience a thorough quality check at all phases of creation with altered sizes and according to the client’s necessity. Carbon steel flange manufacturer in India has four main classes, for example, mellow or low carbon steel, medium carbon steel, high carbon steel and ultra-high carbon steel.

    Carbon steel flange manufacturer in India Mild or low carbon steel contains 0.16%–0.29% carbon with silicon-containing steel and manganese. This flange is pliable and it is conceivable to increase the surface hardness through carburizing whether medium carbon steel contains approx. 0.30–0.59% carbon with different alloys however has great wear obstruction and equalization flexibility and quality. High carbon steel contains approx. 0.6–0.99% carbon with different alloys, we can deliver solid flanges of Carbon steel flange manufacturer in India. Ultra-high carbon steel contains approx. 1–2% carbon yet has extraordinary properties of hardness and carbon steel flanges were carbon contain is over 2% are called solid metal flanges at Carbon steel flange manufacturer in India.



    SIZE :

    150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb


    ASTM A105

    TYPES :

    The higher carbon content will provide you with stronger and harder material.


    • Durability

    • Corrosion resistance

    • Dimensional accuracy

    • High strength

    • Excellent finish